Gage Calibration Methods & Hands-On Workshop
a quality training workshop from The QC Group

This 3-day hands-on workshop offers specialized training in calibration and repair for the individual who has some knowledge of basic Metrology.

jump to registration

TARGET AUDIENCE

Anyone who has an interest in metrology and calibration methods, those who document the measurement and calibration requirements of quality systems, quality engineers, quality and calibration managers, calibration technicians and calibration assistants who would like to learn a system approach should consider attending. Attendees will be equipped with the knowledge to meet current and future calibration needs, be prepared to save the company money on calibrations and grow professionally.

COURSE DELIVERY

Public Workshop and On-site

COURSE CATEGORY

Technical Workshop

COURSE SUMMARY

The QC Group's Gage Calibration Methods training is a hands-on workshop, offering specialized training in calibration and minor repair for the individual who has some knowledge of basic Metrology. Course includes hands-on calibration and minor repairs and adjustments of micrometers, calipers, indicators, bore gages, etc. The course also covers NIST Traceability, Certificates of Conformance, Gage Management, and Standards. Learn the basic requirements of ISO 17025 and ANSI Z540-1 as well as specific rules and processes. Each student is encouraged to participate in actual calibrations using student- provided equipment.

AGENDA

  1. Outside Micrometers
    • a. Mechanical and Digital
      • i. How to read a mechanical micrometer
      • ii. Anvil Parallelism and anvil alignment
      • iii. Calibration using gage blocks and Mic-Trac
      • iv. Disassembly and cleaning the threads
      • v. Federal Standards and tolerances
      • vi. Temperature effects
    • b. Micrometer Standards
      • i. Cleaning
      • ii. Checking straightness
      • iii. Tolerances
      • iv. Calibration
  2. Depth Micrometers
    • a. Mechanical and Digital
      • i. Cleaning measuring surfaces
      • ii. Checking base flatness
      • iii. Checking rod straightness
      • iv. Calibrating and adjusting rod lengths
      • v. Federal Standards and tolerances
  3. Inside Diameter Micrometers
    • a. Temperature effects
    • b. Checking rod straightness
    • c. Checking end caps for proper dimension and flats
    • d. Calibration using Mic-Trac
    • e. Federal standards and tolerances
  4. Calipers
    • a. Vernier
      • i. Cleaning
      • ii. Checking the beam
      • iii. Adjusting and properly setting the gib screws
      • iv. Checking OD and ID jaw parallelism
      • v. Calibration using gage blocks and Mic-Trac
    • b. Dial and Digital
      • i. Cleaning and checking the rack
      • ii. Checking the beam
      • iii. Adjusting and properly setting the gib screws
      • iv. Checking OD and ID jaw parallelism
      • v. Minor repair of the OD and ID jaws
      • vi. Setting the dial hand back to 12 o'clock position
      • vii. Checking ID-OD variance
      • viii. Calibration using gage blocks and Mic-Trac
  5. Indicators (Dial, Digital, and Test)
    • a. Proper use of
    • b. Checking for proper operation
    • c. Cleaning the rack
    • d. Checking and replacing the crystal
    • e. Checking for hysteresis
    • f. Federal standards and tolerances
    • g. Calibration using Indi-check
  6. Bore Gages
    • a. Checking for proper operation
    • b. Checking for flats on contact points
    • c. Accuracies and tolerances
    • d. Calibration using Indi-check
  7. Holetests
    • a. Cleaning and checking for proper operation
    • b. Accuracies and tolerances
    • c. Calibration using ring gage standards
  8. Groove Micrometers
    • a. Cleaning and checking for proper operation
    • b. Combined thickness and parallelism of discs
    • c. Accuracies and tolerances
    • d. Calibration using ring gage standards
  9. Miscellaneous
    • a. Granite Surface Plates
    • b. Torque Wrenches

Course includes hands on calibration and repairs and adjustments of micrometers, calipers, indicators height gages, etc. Course also covers NIST Traceability, Certificates of Conformance, Gage Management, Standards, etc. Each student is encouraged to participate in actual calibrations and repairs using equipment provided.

 

 
 

To register for Gage Calibration Methods & Hands-On Workshop:


Complete the form below, select Date/Location, click Register. You will have the opportunity to review the information before completing the course registration.

All fields are required.


Student Name:
Title:
Company Name:
Mailing Address:
City: State:
Zip:
Phone:
(Numbers only)
Email:
Check if this entry will be used as the billing information at checkout.


Classes Available
09/09/2014 - 09/11/2014 Cincinnati, OH $1695
10/14/2014 - 10/16/2014 Cincinnati, OH $1695
11/11/2014 - 11/13/2014 Cincinnati, OH $1695


Continue Shopping
 
Ask A Questions About This Class   Request A Quote   View All Of Our Training Titles
Call our Training Coordinator at 952-746-5725 (8-4pm Central Time, M-F) with any questions about training with The QC Group.

SmartCart Ecommerce System SmartCart® Ecommerce

Our Commitment

Ourdedicated professional training and consulting staff will provide you with the highest quality training workshops and consultation services to meet all of your quality trainingand consulting needs.

Sign up for Newsletter